Description
Description
Description
Logo
Price:
0.00
Items:
0
Description
Description
Description
Description
Description
FREE SHIPPING ON ALL ORDERS
>>
>>
Description
Description
Logo

SHL 60ml Isopropanol 50% Isopropyl Alcohol IPA with Child Proof Cap

£4.29
QTY
SHL 60ml Isopropanol 50% Isopropyl Alcohol IPA with Child Proof CapSHL 60ml Isopropanol 50% Isopropyl Alcohol IPA with Child Proof Cap 2
Description

Delivery is restricted on this listing to:

• ENGLAND and WALES plus the following postcodes
DD, DG, EH, FK1-15, G, KA1-26, KY, ML, TD, PA1-19, PH1-9 postcodes ONLY
• Excludes Highlands, ALL Islands and Northern Ireland, please contact us if unsure

ISOPROPANOL:

Isopropyl alcohol dissolves a wide range of non-polar compounds. It also evaporates quickly, leaves nearly zero oil traces, compared to ethanol, and is relatively non-toxic, compared to alternative solvents. Thus, it is used widely as a solvent and as a cleaning fluid, especially for dissolving oils. Together with ethanol, n-butanol, and methanol, it belongs to the group of alcohol solvents.

All sizes are shipped with a child proof tamper evident cap fitted as standard, available options allow you to select additional lids, and lint free cloth, If you select Child Proof Caps you will receive the sealed containers with no additonal caps:

ISOPROPANOL QUALITY:

50% is 50% Isopropanol and 50% deionised water

CHILD PROOF CAP

Our child proof tamper evident cap is the default cap for all FILLED bottles, requiring you to push down to rotate the cap it leaves a plastic ring around the neck of the bottle when opened the first time.

FINGER SPRAY CAP

To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

TRIGGER SPRAY CAP

for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

CRAB CLAW & SPOUT CAP

Requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

(Please note this cap  needs to be tightened a LOT before it seals, please test it prior to use)

FLIPTOP CAP

Our child proof tamper evident cap is the default cap for all FILLED bottles, requiring you to push down to rotate the cap it leaves a plastic ring around the neck of the bottle when opened the first time.

PLEASE NOTE:

  • The diptube on the FINGER SPRAY and TRIGGER SPRAYs requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
  • For long term storage customers are advised to put the child proof cap back on.
Lint Free Cloth
Our Lint free cloth is made from the highest specification, non-woven hydro-entangled material. It is aimed directly at the toughest and most demanding jobs. This water-entanglement or spunlaced process eliminates the use of chemical binders in the material avoiding the release of fibres and lint which is normally caused by the chemical binder being dissolved by liquids or solvents, it is fully compatible with all our chemicals.
Click here for more information about Isopropanol.
Click here for the MSDS of the product. You MUST review this before purchasing the product.

RELATED PRODUCTS

Description
Select Volume
Select Cap
Select Cloth
Select Quantity
$SIGNUP$
$VALIDATION$